ECB150 / ECB300 Changelog

Release Date Oct 12, 2012

Changes:

1. Only support ch 01-11 for ETSI auto channel.

2. Add management IP (192.168.0.250).

Fixed Bugs:

1. Fix Scheduler issue.

Release Date Aug 06, 2012

Changes:

1. Support 64 clients.

Fixed Bugs:

1. Fix the low throughput issue on SSID2~4.

2. Fix the low throughput issue when enabling VLAN.

3. Fix the issue that the client will not clear from client list if idle time of the client is more than 300 seconds.

Release Date June 28, 2012

Changes:

N/A

Fixed Bugs:

1. Fix the issue that SW PBC WPS cannot work.

Release Date May 31, 2012

Changes:

1. WPS function is always disabled when enabling RADIUS function on first SSID.

2. Add warning message when enabling RADIUS on first SSID and WPS at the same time.

Fixed Bugs:

1. Fix the issue that client list will exist the AP which DUT on repeater mode connected.

Release Date April 27, 2012

Fixed Bugs:

1. Fix the CLI issue.

(1) Using CLI to configure schedule that Time of day field will display Blank under AP mode.

2. Fix the issue that DUT will reboot when enabling wireless schedule to execute wireless off and getting wireless status via Web on repeater and CB mode.

Changes:

1.Modify TX power setting by dBm. (Request from PM)

ECB150: 11~26dBm

ECB300: 11~29dBm

2. Add Tx power setting on CB mode.

New Feature:

1. Add RADIUS Accounting. (Not support Radius Accounting Interval)

2. Add schedule – reboot.

Release Date March. 29, 2012

Fixed Bugs:

1. Fix the issue that it will get incorrect WLAN MAC via NMS after a long time.

2. Fix the CLI issue.

Changes:

1.Add the setting of white and black list on GUI, SNMP and CLI.

2. Add the setting of CLI on GUI. (Management->CLI)

3. Add and modify CLI commands.

New Feature:

1. Support black list of wireless MAC filter.

2. Support CLI via SSH.

Release Date March. 08, 2012

Fixed Bugs:

1. Modify WPS behavior for WPS 1.0.

Release Date Feb. 23, 2012

Fixed Bugs:

1. Fix the issue that client list is incorrect on WDS AP mode.
2. Remove the WEB display of the data rate on CB mode.
3. Remove the WEB setting of WDS data rate.
4. Fix the issue that WPS function cannot work.
5. Fix the issue that DUT on CB mode cannot connect to AP with WPA TKIP.

Release Date Feb. 15, 2012

Fixed Bugs:

1. Fix the issue that can not change operation mode on some modes.

2. Fix the auto channel issue.

3. Fix the issue that clients cannot connect to AP when AP is 11b mode. (Don't support WPS in 11b only mode)

4. Fix the issue that client cannot use WPA TKIP and AES to connect to AP with WPA2 Mixed.

5. Fix the issue that the ESSID field of System and Wireless Status is incorrect when SSID has special characters on CB mode.

6. Fix the issue that DUT on CB mode cannot auto connect to AP with WPA2 AES.

7. Fix the issue that the function of Restore Setting cannot work.

Changes:

1. Only support UPNP on AP router mode.

2. Remove LED Control setting from WEB.

3. Display DNS and gateway information on WEB.

4. Add to display IP message when changing operation mode to CB mode and LAN connection type is dynamic IP.

5. Only support LAN dynamic IP on AP mode.

6. Only support VLAN on AP mode.

New Feature:

NA

Release Date Jan. 20, 2012

First Release

Default IP : 192.168.1.1

Default Mode : Client Bridge

Operation Mode : Access Point / Client Bridge / WDS AP / WDS Bridge / Access Point Router / Universal Repeater